「大慶快速門」廠房堆積門的密封效果



Sealing effect of stacking doors of "Qinhuangdao Express Gate" workshop

 

快速門率先接納高強度鋁合金為主要質料，運行速度每秒超過2米速度，是快速升降的無障礙隔離門，主要功能是保溫、保濕、防塵、防蟲、隔音等，使車間連結恒溫、恒濕、清潔的工作環境。適合于食品、醫藥、電子、橡膠、化工、汽車、紡織、物流等平臺



Fast door takes the lead in accepting high strength aluminium alloy as the main material. It runs faster than 2 meters per second. It is a barrier-free isolation door for fast rising and falling. Its main functions are insulation, moisturizing, dust-proof, insect-proof, sound-proof and so on. It enables the workshop to connect with a constant temperature, humidity and clean working environment. Suitable for food, medicine, electronics, rubber, chemical industry, automobile, textile, logistics and other platforms


 

在寒冷的冬季，室內外溫差較大，如果氣密性不高，導致室內外空氣形成壓力差，室外冷空氣通過縫隙進入室內，造成室溫劇烈波動，影響室內環境并消耗大批熱能，



In cold winter, "Zhangjiakou Express Gate" interlocking stacking door debugging precautions, indoor and outdoor temperature difference is large, if the air tightness is not high, resulting in indoor and outdoor air pressure difference, outdoor cold air through the gap into the indoor, resulting in sharp fluctuations in room temperature, affecting the indoor environment and consuming a large number of heat energy.



這種現象我們稱之為“冷風滲透”;而在夏季炎熱天氣，室外的高溫天氣及室內接納空調制冷，空氣流動產生的熱風通過縫隙進入室內，導致制冷能耗增加。



This phenomenon is called "cold air infiltration". In hot summer weather, outdoor high temperature weather and indoor air conditioning refrigeration, hot air generated by air flow enters the room through the gap, resulting in an increase in refrigeration energy consumption.



無論是寒冷還是炎熱，在氣密性不好的情況下，室內外的溫差都將導致耗能的增加，因此，硬質快速門的氣密機能是其節能的一個重要措施。



Whether it is cold or hot, in the case of poor air tightness, the temperature difference between indoor and outdoor will lead to an increase in energy consumption. Therefore, the airtightness function of hard fast valves is an important measure of energy saving.



「大慶快速門」廠房堆積門的密封效果



Sealing effect of stacking doors of "Qinhuangdao Express Gate" workshop
 

且簾片底部裝有氣囊布兜，能同種種不平坦地面密封結合，導軌內置毛刷，以達到高度密封效果。



And the bottom of the curtain is equipped with airbag pockets, which can be combined with various uneven ground seals. Why does the "Tangshan Express Gate" express gate tremble sharply when it is running? The guide rail has built-in brush to achieve high sealing effect.



快速門保護裝置：快速門門柱底部裝有紅外線裝置，在關閉的過程中觸及障礙物，立即停止下降反彈回升。另可選配安全氣囊裝置，增加安全系數。



Fast door protection device: Infrared device is installed at the bottom of the fast door pillar, which touches obstacles in the process of closing, stops descending and rebounds immediately. Additionally, the airbag device can be selected to increase the safety factor.



快速門密封機能：底部裝有加重PVC底兜，可與種種不平地面緊密結合。門柱兩側裝有密封毛刷，可減少噪音及增加密封效果。



Fast door sealing function: The bottom is equipped with aggravated PVC bottom pocket, which can be tightly combined with various uneven ground. Sealing brushes are installed on both sides of the door post, which can reduce noise and increase sealing effect.



快速門驅動裝置：sew電機門單相220v功率為0.75-1.5KW專用馬達強力剎車器蝸輪減速機一體式。



Fast door drive device: sew motor door single-phase 220V power is 0.75-1.5KW special motor strong brake worm wheel reducer integrated.